Fujitsu XG0448 Hardware Manual page 40

XG0448 Hardware Guide
Precautions
Cable length will be as below based on the specification of the optical fiber cable
Type
MMF
Use the appropriate cable according to the installation place.
Connecting CX4 Cable
Firmly install CX4 cable to CX4 expansion card port and lock the cable.
CX4 cable
Precautions
• Make sure to firmly insert the cable straight from behind.
• When bending the cable, make sure that the diameter of the bent cable does not become somaller than 10cm.
• When pulling out the cable, make sure to pull the pull tab of the cable connector. The cable may disconnect if you
pull the cable itself.
Core/Cladding Diameter
62.5/125 µ m
50/125 µ m
Minimum Transimission Band
160MHz/km
200MHz/km
400MHz/km
500MHz/km
2000MHz/km
40
Chapter 2 Installation
Cable Length (m)
26
33
66
82
300
Connecting the Equipment