Table of Contents
Advertisement
XG0448 Hardware Guide
2.
Put rack mounting brackets on the switch using M3 Countersunk Screws (Qty 8).
Two ways below are possible for putting on rack mounting brackets.
[STANDARD]
Rack Mounting Brackets
Precautions
When putting on rack mounting brackets, make sure to use special screws included in the 19" rack brackets set. If other
screws are used, it may break. Also, make sure to use cross slot screwdriver corresponding to the screw thread.
3.
Fix the switch that rack mounting brackets are put at the procedure 2.
Installation screw
Precautions
Pre-occupied devices in the upper and/or lower row of the rack may interfere with the power cable of the switch from
being properly installed. In that case, plug the power cable to the switch before install it in the rack.
[OFFSET]
M3 Countersunk
Screws
32
Chapter 2 Installation
M3 Countersunk
Screws
Rack Mounting Brackets
Installation
Advertisement
Table of Contents
