Table of Contents
Advertisement
XG0448 Hardware Guide
1.1.2
Port Side
Console Port
LED
USB Port
Dump Switch
Reset Switch
Product Part Number, Serial Number Label
•
Console Port
Caution
The RJ45 Console Port jack is an RS-232 serial interface. Do not plug any other interface types
(Ethernet) into this jack. It may cause failure of the device.
Reference User's Guide "1.1.5 Console Port Specifications" (pg.29)
•
10/100/1000BASE-T Ports
Precautions
RJ45 ports 45 through 48 are 'combination' ports that are associated with the four SFP ports. Their use is mutually
exclusive. If the RJ45 port 45 is cabled then the associated SFP slot cannot be used.
•
SFP Slots
•
USB Port
•
Dump Switch
•
Reset Switch
•
Product Part Number, Serial Number Label
10/100/1000BASE-T Ports
In order to set and operate the switch, use the console cable adapter and D-SUB9pin
cross cable included in this package to connect to the PC.
10/100/1000BASE-T Ports. These ports for connecting to Ethernet (10/100/1000BASE-
T) Network Equipment.
Please use Category 5 LAN cable (if 1000BASE-T, use Category 5E or above) for
cabling.
Installing an SFP module in a SFP slot will allow connection to a 100BASE-FX/
1000BASE-SX/1000BASE-LX/1000BASE-ZX/1000BASE-BX-D/1000BASE-BX-U
optical cable. Its associated RJ45 port can no longer be used.
Insert a USB memory device to load/save configuration files or update firmware.
Press the dump switch to copy the following switch files to an installed USB memory.
Information
Configuration Definition 1
Configuration Definition 2
Firmware
Error Log
The switch default configuration disables the dump switch. To activate the dump switch
use the dumpswitch command.
Press to reboot
The label is provided for easy access to product information for inventory purposes at
the port side of the switch.
19
SFP Slots
File Name
/um0/config1
/um0/config2
/um0/firmware
/um0/elog
Items in the Package, Descriptions and Functions
Chapter 1 Getting Started
LED
Advertisement
Table of Contents
