Chapter 4
Maintenance and Upgrade Procedures
Step 7
To install the system CompactFlash, align the new system CompactFlash with the connector on the riser
card.
Step 8
Push the system CompactFlash inward until it is fully seated in the connector, see
Figure 4-12
1
System CompactFlash
Step 9
Replace the adaptive security appliance cover.
Step 10
Reinstall the network interface cables.
78-17989-01
Replacing the System CompactFlash
1
Removing and Replacing the CompactFlash
Cisco ASA 5500 Series Hardware Installation Guide
Figure
4-12.
4-11