Cisco WS-C5509 Hardware Installation Manual page 13

Chapter 1 Overview
4. The RJ-45 Auxiliary port (labeled AUX on the chassis) is reserved for internal use at Cisco. The port is not functional
in shipping versions of the chassis; therefore, customers cannot connect to this port to run the adaptive security
appliance CLI.
For more information about the Management port, see themanagement only command in the
Cisco Security Appliance Command Reference.
The Cisco ASA 5550 has a fixed configuration with an embedded 4GE slot as shown in
Figure 1-3
LNK 3
1 RJ-45 ports
2 RJ-45 Link LED
3 RJ-45 Speed LED
4 Power LED
5 Status LED
6 SFP ports
7 SFP Link LED
8 SFP Speed LED
1. GigabitEthernet ports, from right to left, GigabitEthernet 1/0, GigabitEthernet 1/1, GigabitEthernet 1/2, and
GigabitEthernet 1/3
2. Not supported at this time.
3. The management 0/0 interface is a Fast Ethernet interface designed for management traffic only.
4. GigabitEthernet interfaces, from right to left, GigabitEthernet 0/0, GigabitEthernet 0/1, GigabitEthernet 0/2, and
GigabitEthernet 0/3.
5. SFP ports, from right to left, GigabitEthernet 1/0, GigabitEthernet 1/1, GigabitEthernet 1/2, and GigabitEthernet 1/3
Table 1-1
Table 1-1
2, 7
OL-10089-01
Rear Panel LEDs and Ports for the Cisco ASA 5550
2 3 8
7
2 1 0 SPD
5
6
1 9
4
1
5
describes the 4GE SSM LEDs.
4GE SSM LEDs for the Cisco ASA 5550
LED Color State
LINK Green Solid
Flashing
10
LINK SPD LINK SPD LINK SPD LINK SPD
3 2 1 0
12 14 16
11
13
2
9 USB 2.0 interfaces
3
10 Management port
4
11 Network interfaces
12 Power indicator LED
13 Status indicator LED
14 Active LED
15 VPN LED
16 Flash LED
Description
There is an Ethernet link.
There is Ethernet activity.
Cisco ASA 5500 Series Hardware Installation Guide
Product Overview
19
18
20 21
FLASH
22
17
15
17 AUX port
18 External CompactFlash slot
19 Serial Console port
20 Power switch
21 Power indicator LED
22 Power connector
Figure 1-3.
1-3