Cisco WS-C2960G-8TC-L Configuration page 30

386
Chapter 12: Initial Switch Configuration
Port Security Feature
8. ® A. Port security is used to prevent unauthorized access to a LAN.
✓
® ˚ B is incorrect because 802.1Q is a VLAN trunking protocol. C and D are used to restrict
access to the switch, not to the LAN for which the switch provides connectivity.
C. Dynamic, not sticky, learning is the default.
9. ®
✓
® ˚ A, B, and D are defaults and thus incorrect.
10. ® D. You should statically define MAC addresses of servers and routers when using port
✓
security.
® ˚ A and C are used for user ports. B is a nonexistent learning mode.