Self Test - Cisco WS-C2960G-8TC-L Configuration

SELF TEST

The following Self Test questions will help you measure your understanding of the material presented
in this chapter. Read all the choices carefully, as there may be more than one correct answer. Choose
all correct answers for each question.
2960 Overview
1. The SYSTEM LED will be __________ if the switch has experienced a malfunction.
A. green
B. off
C. amber
D. red
2. Two PCs are connected to a switch configured in the same subnet, but they can't ping each
other. 100BaseTX is used for connectivity. What would not indicate a problem?
A. The PORT LED is off on one of the two PCs' switch port connections.
B. The PORT LED is amber on one of the two PCs' switch port connections.
C. The SYSTEM LED is off.
D. The MIC connectors on the Ethernet cables are not seated correctly in the switch ports.
Switch Startup
3. Which of the following is not asked for during the System Configuration Dialog script?
A. Enabling interfaces
B. Default gateway address
C. VLAN interface to use for management functions
D. Enable secret password
Basic Switch Configuration
4. In which configuration mode is the default gateway address configured for a switch?
A. Interface
B. Line
C. Global
D. Port
5. Your switch is in the management subnet (192.168.1.0/25). The switch should have the second
to the last valid host address in the subnet in the management VLAN, which is VLAN 5. The
router in the subnet uses the last valid host address in the subnet, which is the switch's default
gateway. Configure the switch to allow it to reach other subnets.
383
Self Test