Cisco WS-C2960G-8TC-L Configuration page 28

384
Chapter 12: Initial Switch Configuration
Basic Switch Operation and Verification
6. Enter the switch command that allows you to see the contents of the port address
table: __________.
7. Examine the following MAC address table on a switch. What will happen if a switch sees
a frame with a destination MAC address of 0000.1111.DDDD?
Switch> show mac address-table
Vlan Mac Address
---- -----------
1 0000.1111.AAAA
1 0000.1111.CCCC
1 0000.1111.BBBB
A. Flood it
B. Drop it
C. Forward it out FA0/1
D. Forward it out of FA0/1 and FA0/2
Port Security Feature
8. Which switch feature is used to prevent unauthorized access to a LAN?
A. Port security
B. Port security and 802.1Q
C. VTY passwords
D. Enable password
9. Which of the following is not a default configuration for port security?
A. 1 MAC address per interface
B. Violation mode shutdown
C. Sticky learning
D. Disabled by default
10. What learning mode should you use to associate a server with a switch port when port security
is enabled?
A. Dynamic
B. Automatic
C. Sticky
D. Static
Type Ports
---- -----
DYNAMIC FA0/1
DYNAMIC FA0/2
DYNAMIC FA0/3