Cisco Ubr7225Vxr Chassis; Subchassis And Midplane; Cisco Ubr7225Vxr Subchassis - Cisco UBR7225VXR Hardware Installation Manual

Hardware Component Descriptions

Cisco uBR7225VXR Chassis

The front of the chassis has two slots for cable interface line cards and one bay for the subchassis. See
Figure
Figure 1-11
3
1
2

Subchassis and Midplane

The subchassis and midplane provide these functions for the Cisco uBR7225VXR router:
•
•
•

Cisco uBR7225VXR Subchassis

The subchassis (the rear of the router) has two bays for power supplies and one slot for a network
processing engine. (See
midplane has two connectors for cable interface line cards.
The power supply side of the midplane has two connectors for power supplies and one connector for a
network processing engine. The midplane supplies DC power to the router's internal components.
Refer to the Cisco uBR7200 Series Universal Broadband Router Subchassis and Midplane Replacement
Instructions at the following URL:
http://www.cisco.com/en/US/docs/cable/cmts/ubr7200/installation/5193sbm.html
Cisco uBR7225VXR Universal Broadband Router Hardware Installation Guide
1-16
1-11.
Cisco uBR7225VXR Chassis
uBR7225-VXR
Subchassis and midplane bay (at rear)
Cable interface line card slots
Distributes power from the power supply.
Bridges the peripheral component interconnect (PCI) buses from the cable interface line cards to the
Cisco uBR7200-NPE-G1 or the Cisco uBR7200-NPE-G2.
Arbitrates traffic across the PCI buses.
Figure
1
Fan tray
3
1-12.) The cable interface card side of the Cisco uBR7225VXR router
Chapter 1 Cisco uBR7225VXR Overview
2
OL-17309-01