Configuring Vlan Port Settings - Cisco SLM2008PT-NA Administration Manual

Advanced Configuration
VLAN
STEP 1
STEP 2
STEP 3
STEP 4
Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power Administration Guide
The VLAN > VLAN Settings window allows you to create or delete a VLAN.
To configure or change VLAN settings, follow these steps:
Click VLAN > VLAN Settings.
To create a single VLAN, enter the VLAN ID, and click Add.
• VLAN ID—ID of configured VLAN (1-4094, no leading zeroes).
To remove a VLAN, select the VLANs in the VLAN list, then click Delete.
Click Save.

Configuring VLAN Port Settings

From the VLAN > VLAN Port Settings window, you can configure VLAN behavior
for specific interfaces, including the mode, accepted frame type, VLAN identifier
(PVID), and ingress filtering.
5
25