Cisco SLM2008PT-NA Administration Manual page 41

Advanced Configuration
QoS
STEP 1
STEP 2
Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power Administration Guide
The QoS > QoS Settings window displays the current QoS settings.
To configure the QoS settings, follow these steps.
Click QoS > QoS Settings.
Set the Queue Mode to Strict Priority or WRR.
• Strict Priority—Services the egress queues in sequential order,
transmitting all traffic in the higher priority queues before servicing lower
priority queues.
• WRR—Weighted Round-Robin shares bandwidth at the egress ports by
using scheduling weights 1, 2, 4, 8 for queues 1 through 4 respectively.
- WRR Weight—Displays the WRR weights to queues.
5
36