Getting To Know The Switch; Front Panel - Cisco SLM248P Quick Start Manual

Welcome
Thank you for choosing the Cisco Small Business Series Smart Gigabit
Switch. The Smart Switches offer the following interfaces:
• The SLM2024 and SLM2048 offer twenty four (24) or forty eight (48)
gigabit copper ports, with two (2) shared copper or optical (SFP) uplink
interfaces for connecting the switch to the core network.
• The SLM224G, SLM224P, SLM248G, and SLM248P offer twenty four
(24) or forty eight (48) 10/100 copper ports, with two (2) shared gigabit
copper or optical (SFP) uplink interfaces for connecting the switch to
the core network.
This guide describes how to physically install your Smart Switch, connect
network devices, and launch the Web-based configuration utility.
1

Getting to Know the Switch

SLM2024 and SLM2048
The following section describes the SLM2024 and SLM2048 switches.
The front panel of the SLM2048 is shown.

Front Panel

Gigabit — (1-24 or 1-48) (Amber) Lights up to indicate a functional 1000
Mbps connection on the corresponding port (1 through 24 or 48) to an
attached device.
To establish a gigabit Ethernet connection by using a miniGBIC port, you
must install a MGBT1, MGBSX1, or MGBLH1 gigabit expansion module and
use Category 5e cabling or fiber optic cabling.
Cisco Small Business SLM Series Smart Switch Installation Guide 1