Next Steps - Cisco SLM248P Quick Start Manual

If the above recommendations do not work, try the same steps by using a
different computer. The switch might have some hardware problems if the
second computer also fails to establish a link, please contact technical
support for further assistance.
If you need help resolving a problem, visit the Cisco Small
N
OTE
Business Support Community at
smallbizsupport. For technical documentation and other links, see
Where to Go From Here, page
Returning the Switch to the Factory Default
Settings
Factory Default
The
to the factory defaults shipped with the switch. Restoring factory defaults
erases the configuration file. This should only be performed as a last
resort.
Restoring the factory defaults will erase all of your current configuration
settings. Before you restore the factory defaults, you can save a backup of
your current configuration settings from the
You can also restore the factory defaults of your switch by pressing and
holding the Reset button on the front of the switch for more than ten
seconds.

Next Steps

Congratulations, you are now ready to start using your switch. Consider
taking some of the following steps:
• Go to the "Getting Started" section of the
Smart Switch Administration Guide
detailed configuration of the switch.
• Change the default password of the switch to protect it from
unauthorized access.
• Visit the software downloads area at
downloads
latest version of software to ensure your switch is running the most
recent version of the firmware.
• Review additional documentation and resources at
www.cisco.com/en/US/products/ps9994/
tsd_products_support_series_home.html
8
window allows network managers to reset the switch
and navigate to your model of the switch. Check for the
Cisco Small Business SLM Series Smart Switch Installation Guide
www.cisco.com/go/
9.
Save Configuration
Cisco Small Business SLM
. This is the starting point for
http://tools.cisco.com/support/
window.
http://