Getting Started With Your Switch; Box Contents - Cisco Catalyst 2960-X Getting Started Manual

Revised: December 3, 2013, OL-28310-02

Getting Started with Your Switch

This guide provides instructions on how to use Express Setup to initially configure your Catalyst switch. It also covers switch
management options, basic rack-mounting, stacking guidelines, port and module connection procedures, and troubleshooting help.
Before installing or upgrading the switch, refer to the release notes.
Note

Box Contents

Figure 1: Box Contents
1 Catalyst 2960-X switch
or Catalyst 2960-XR switch (power supply modules not
shown)
2 AC power cord
3 Four rubber mounting feet
4 Documentation
5 Two 19-inch mounting brackets
2
1
9 Four number-10 Phillips pan-head screws (48-0627-01)
10 Four number-8 Phillips flat-head screws (48-2927-01)
for Catalyst 2960-X switches
Eight number-8 Phillips flat-head screws (48-2927-01)
for Catalyst 2960-XR switches
11 Two number-4 pan-head screws (48-0482-01)
12 One black Phillips machine screw (48-0654-01)
2
13 (Optional) Console cable or USB cable
3