Configuration Of The Rv042; Configuration Of Pc 1 And Pc 2 - Cisco RV042 - Small Business Dual WAN VPN Router User Manual

Appendix C
RVL200 IPSec VPN Settings
8. For the Remote Security Gateway Type, select
Then select IP by DNS Resolved. Enter the RV042's
domain name in the field provided.
9. For the Remote Security Group Type, select
Enter the RV042's local network settings in the IP
Address and Subnet Mask fields.
10. In the IPSec Setup section, select the appropriate
encryption, authentication, and other key management
settings.
11. In the Preshared Key field, enter a string for this key, for
example, 13572468.
RVL200 IPSec Setup Settings
12. If you need more detailed settings, click
Settings. Otherwise, click Save Settings and proceed
to the next section, "Configuration of the RV042. "

Configuration of the RV042

Follow similar instructions for the RV042.
1. Launch the web browser for a networked computer,
designated PC 2.
2. Access the web-based utility of the RV042. (Refer to
"Chapter 4: Advanced Configuration" for details.)
VPN tab.
3. Click the
Gateway to Gateway tab.
4. Click the
5. Enter a name in the Tunnel Name field.
6. Select the appropriate Interface,
10/100 4-Port VPN Router
IP Only.
Subnet.
Advanced
WAN1 or WAN2.
Gateway-to-Gateway VPN Tunnel
Enable.
7. Select
8. For the Local Security Gateway Type, select
The WAN IP address (B.B.B.B) of the RV042 will be
automatically detected.
For the Local Security Group Type, select Subnet. Enter
the RV042's local network settings in the IP Address and
Subnet Mask fields.
RV042 VPN Settings
9. For the Remote Security Gateway Type, select
Then select IP by DNS Resolved. Enter the RVL200's
domain name in the field provided.
10. For the Remote Security Group Type, select
Enter the RVL200's local network settings in the IP
Address and Subnet Mask fields.
11. In the IPSec Setup section, select the appropriate
encryption, authentication, and other key management
settings. (These should match the settings of the
RVL200.)
12. In the Preshared Key field, enter a string for this key, for
example, 13572468.
RV042 IPSec Setup Settings
13. If you need more detailed settings, click
Settings. Otherwise, click Save Settings.

Configuration of PC 1 and PC 2

Verify that PC 1 and PC 2 can ping each other (refer to
Windows Help for more information). If they can ping
each other, then the VPN tunnel is configured correctly.
IP Only.
IP Only.
Subnet.
Advanced
66