Casio EXILIM EX-Z70 User Manual page 245

APPENDIX
• Take care when connecting the USB cable to the
USB cradle or your computer. USB ports and cable
plugs are shaped for proper positioning.
• Plug the USB cable plugs into the ports securely, as
far as they will go. Proper operation is not possible if
connections are not correct.
3.
Press the camera's power button to turn it on,
and then press its [MENU] button.
4.
Select the "Set Up" tab, select "USB", and
then press [ ].
5.
Use [ ] and [ ] to select "Mass Storage (USB
DIRECT-PRINT)", and then press [SET].
6.
Turn off the camera.
7.
Place the camera onto
the USB cradle.
• Do not place the camera
onto the USB cradle
while it is turned on.
8.
Press the USB cradle's [USB] button.
• Pressing the [USB] button enters the USB mode,
which causes the USB cradle's [USB] lamp to light
green.
• Your Macintosh will see the camera's file memory as
a drive.
• The appearance of the drive icon depends on the
Mac OS version you are using.
• Your Macintosh will see the camera's file memory as
a drive whenever you establish a USB connection
between the camera and your Macintosh.
245
[USB] button
[USB] lamp