Using A Memory Card - Casio EXILIM EX-Z70 User Manual

USING A MEMORY CARD

USING A MEMORY CARD
You can expand the storage
capabilities of your camera by using
a commercially available memory
card (SD memory card or
MultiMediaCard). You can also
copy files from built-in memory to a
memory card and from a built-in
memory card to built-in memory.
• Normally, files are stored in built-in memory. When you
insert a memory card, however, the camera automatically
stores files to the card.
• Note that you cannot save files to built-in memory while a
memory card is installed in the camera.
IMPORTANT!
• Use only an SD memory card or a MultiMediaCard
with this camera. Proper operation is not guaranteed
when any other type of card is used.
• See the instructions that come with the memory card
for information about how to use it.
• Certain types of cards can slow down processing
speeds. If you are using a slow memory card, you
may not be able to record a movie using the "HQ"
image quality setting. Because of this, use of an SD
memory card with a maximum transfer speed of at
least 10MB per second is recommended.
• Certain types of memory cards take longer to record
data, which can cause movie frames to be dropped.
and flash on the monitor screen during
REC
recording to let you know when a frame has been
dropped. Use of an SD memory card with a
maximum transfer speed of at least 10MB per
second is recommended.
• SD memory cards have a write protect switch, which
you can use to protect against accidental deletion of
image data. Note, however, if you write protect an
SD memory card, you must remove write protection
whenever you want to record to it, format it, or delete
any of its files.
• Electrostatic charge, digital noise, and other
phenomena can cause data to become corrupted or
even lost. Always maintain backup copies of
important data on other media (CD-R, CD-RW, MO
disc, computer hard disk, etc.)
171