Date Printing - Casio EXILIM EX-Z70 User Manual

PRINTING IMAGES

Date Printing

Any one of the procedures described below can be used to
include the recording date in image prints. Correct date
printing requires that the current date be set on the camera
before the image is recorded.
• Before recording the image, turn on date stamping
("Date" or "Date&Time") (page 122).
• Specifying date printing with DPOF settings (page 180)
— If you use the DPOF setting to turn on date stamping
for printing on an image that already has date/time
stamp data embedded in it (page 122), the two stamps
will be superimposed. Because of this, do not turn on
DPOF date stamping if an image already has a date/
time stamp embedded on it.
— Some printers may have settings that disable time
stamp and/or DPOF printing. See the user
documentation that comes with your printer for details
about how to enable these features.
— Note that some professional print services do not
support DPOF printing. Check with your service before
ordering prints.
• Specifying date printing with the Photohands software
that comes with the camera
— See page 23 of the Photohands User's Guide for
details. The Photohands User's Guide is provided as a
PDF file on the CD-ROM that comes bundled with your
camera.
• Specifying date printing when having printing done by a
print service
— Some print services do not support date printing.
Check with your service for more information.
I Printing Precautions
• See the documentation that comes with your printer for
information about print quality and paper settings.
• Contact your printer manufacturer for information about
models that support PictBridge and USB DIRECT-PRINT,
upgrades, etc.
• Never disconnect the USB cable or perform any camera
operation while printing is in progress. Doing so causes a
printer error.
187