Advertisement
Quick Links
KBR-500
Bill Loading Procedure
The Kolibri KBR-500 is designed to count up to 1000 bills per minute, positioning it as one of the quickest and
most economiocal back-loading mixed value counters on the market. To prevent issues such as jamming,
misfeeding, or tearing of bills, employing the correct procedure for loading bills is crucial. For optimal
performance, it is advised to limit the counting to no more than 200 bills at a time.
Kolibri advises using the following technique for bill loading:
1. Adjust the bill guides to a size slightly wider (0.10" on each side) than the width of the bills in the stack (all
US dollar denomination are the same size).
2. Correct or remove the bills if they are severly wrinkled, damaged or folded. Avoid counting bills that are
excessively dirty, soiled, folded, curled or with foreign material like clips, bands, etc. Bills such as these
can cause the machine to malfunction.
3. Square the stack as shown below:
KBR500-02232024-BP
www.kolibriusa.com
olibri
© 2024 Kolibri USA
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Kolibri KBR-500
Summary of Contents for Kolibri KBR-500
- Page 1 KBR-500 Bill Loading Procedure The Kolibri KBR-500 is designed to count up to 1000 bills per minute, positioning it as one of the quickest and most economiocal back-loading mixed value counters on the market. To prevent issues such as jamming, misfeeding, or tearing of bills, employing the correct procedure for loading bills is crucial.
- Page 2 Top View Side View IF, after... using the recommended bill loading method, this does not resolve the issue, please see the support section on the Kolibri USA website at www.KolibriUSA.com, or contact Kolibri Support at support@KolibriUSA.com for further troubleshooting. KBR500-02232024-BP www.kolibriusa.com...
Need help?
Do you have a question about the KBR-500 and is the answer not in the manual?
Questions and answers