Saftey Instructions - Beko METPOINT BDL Compact Installation And Operating

Daisychain setup

1. Saftey instructions

Please check whether this manual corresponds with the device type.
Please attend to all notes indicated in this instruction manual. It contains essential
information which has to be followed during installation, operation and maintenance.
Therefore this instruction manual has to be read categorically by the technician as
well as by the responsible user/qualified personnel before installation, initiation and
maintenance.
This instruction manual has to be available at any time at the operation site of the
BDL.Compact Regional and national regulations respectively, have to be observed in
addition to this instruction manual if necessary.
In case of any obscurities or questions with regard to this manual or the instrument
please contact manufacturer.
Warning
Supply voltage!
Contact with supply voltage carrying non-insulated parts may cause
an electric shock with injury and death.
Measures:
• Note all applicable regulations for electrical installations (e. g. VDE 0100)!
• Carry out maintenance only in strainless state!
• All electric works are only allowed to be carried out by authorized qualified personnel
Warning
Inadmissible operating parameters!
Undercutting and exceeding respectively of limit values may cause
danger to persons and material and may lead to functional and
operational disturbances.
Measures:
• Make sure that the BDL Compact is only operated within the admissible limit values indicated on the type
label.
• Strict observance of the performance data of the BDL Compact in connection with the application.
• Do not exceed the admissible storage and transportation temperature.
Further safety instructions:
• Attention should also be paid to the applicable national regulations and safety instructions during
installation and operation.
• The BDL Compact is not allowed to be used in explosive areas.
Additional remarks:
• Do not overheat the instrument!
Warning
Malfunctions at the BDL Compact!
Faulty installation and insufficient maintenance may lead to
malfunctions of the BDL Compact which may affect the measuring
results and which may lead to misinterpretations.
METPOINT BDL Compact
®
3 | 32