Modbus Tcp Communication Settings; Modbus Addressing Model - Beko METPOINT BDL Compact Installation And Operating

METPOINT ® BDL Compact
6. Modbus TCP communication settings
7. Modbus addressing model
The BDL Compact RS485 Modbus allows read/write access according chapter 8
Not defined registers are not accessible / not supported.
Byte Order:
The size of each Modbus-register is 2 Byte. For a 32 bit value two Modbusregister will be read out by the BDL
Compact. Accordingly for a 16bit Value only one register is read.
Out formats of BDL Compact:
Single word
HByte
18 => 00
Data Order 1. Byte
12
For verification of a correct dataformat please read out register 64000 or 64002.
Result should be.
Register 64000: Long Integer Value =1000000
Register 64002: Float
10 | 32
LByte
12 29235175522=>
2. Byte Data Order
00
Value = 1000000.0
By communication via Modbus TCP the
have to be set only
and confirmed by pressing
Double word
HWord
HByte LByte
AE
1.Byte 2.Byte
56
Daisychain setup
Modbus Id
Apply button
LWord
HByte LByte
41 56 52
3.Byte 4.Byte
52 AE 41