1. General Information 1.1 Introduction To ensure your Anthony Liftgates DDR™ Medium Duty Rail Liftgate will perform to your expectations, we have provided this Operation Manual, which is designed to provide you with the necessary operating instructions and safety precautions for the operation of the liftgate.
This information is on the liftgate and will help us verify your information and serve you best. In the provided space below, record the serial number, model number, and load capacity for easy reference when contacting Anthony Liftgates Customer Service with any questions. Serial Number Information Serial No.
If procedures or operating techniques that are not specifically mentioned by Anthony Liftgates are used, you must satisfy yourself that they are safe for you and for bystanders. Make sure the liftgate or vehicle that it is interacting with will not be damaged or made unsafe by any operating method you choose.
The following safety instructions are provided to help prevent potential injury. Not following these instructions may result to injury. Anthony Liftgates recommends not riding on the platform when it is raising or lowering a load. If, however, conditions require it, make sure you stand away from the edge, and your footing is stable.
For service or ordering replacement parts, contact an authorized dealer by going to www.anthonyliftgates.com and selecting the FIND A DEALER tab. Enter your zip code to find the nearest authorized service location. Operation (6/24) Anthony Liftgates, Inc. 800-482-0003 www.anthonyliftgates.com...
Repair any damage to the liftgate to prevent accidents. Place the liftgate into the storage position with the platform latches (TRAVELING position) when the liftgate is not in use. Anthony Liftgates, Inc. Operation (6/24) www.anthonyliftgates.com 800-482-0003...
Page 10
Do not operate the liftgate with the housing cover removed. Do not drive the truck unless the liftgate is in the stored position and the latch pins are secured with the latch brackets (TRAVELING position). Operation (6/24) Anthony Liftgates, Inc. 800-482-0003 www.anthonyliftgates.com...
4. Operating Instructions Anthony Liftgates strongly recommends the installation of an optional cut-off switch. This switch prevents accidental or unauthorized use of the liftgate by disconnecting power between the battery and the power unit. Make sure the area in which the...
Page 12
Unfold the platform. b. Hydraulic Option -- Standing to the side of the liftgate, hold the control switch in the open position until the platform is fully opened. Operation (6/24) Anthony Liftgates, Inc. 800-482-0003 www.anthonyliftgates.com...
Page 13
Then close the platform and run upward until it is latched in the column latches.” Anthony Liftgates, Inc. Operation (6/24) www.anthonyliftgates.com 800-482-0003...
Page 14
NOTES Operation (6/24) Anthony Liftgates, Inc. 800-482-0003 www.anthonyliftgates.com...
Page 16
1037 West HOWARD ST. P.O. BOX 615 PONTIAC, IL 61764-0615 PH: 815-842-3383 FAX: 815-844-3612 TOLL FREE: 800-482-0003 WWW.ANTHONYLIFTGATES.COM THE ORIGINAL NAME IN LIFTGATES - THE ORIGINAL NAME IN LIFTGATES - SINCE 1941 SINCE 1941 Form No. L-205-OM (6-24)
Need help?
Do you have a question about the DDR-25 and is the answer not in the manual?
Questions and answers