EcoFlow DELTA 3 Plus Manual page 5

1 Wi-Fi
On: Wi-Fi connection successful.
Flashing: Wi-Fi connected to the power station is not available.
Off: Wi-Fi disconnected.
2 Bluetooth
On: Bluetooth connection successful.
Flashing: Bluetooth pairing in progress.
Off: ① Wi-Fi is connected and Bluetooth is disconnected as a result. ②
Bluetooth is disconnected because the Bluetooth on your phone is turned
off.
※ Please refer to the "Control via EcoFlow App"chapter for more details.
3 Self-powered
On: Self-powered work mode is enabled in the EcoFlow app.
4 Backup Reserve
On: Backup Reserve level is set in the EcoFlow app.
5 TOU Mode
On: TOU (Time of use) mode is enabled in the EcoFlow app.
6 Scheduled Tasks
On: At least one scheduled task is configured in the EcoFlow app.
7 Storm Guard
On: The Storm Guard is on. Ensure the Wi-Fi is connected, and the power
station is connected to grid power to quickly top-up.
※ Scheduled AC charging and solar/car charging tasks are disabled under
these conditions.
8 Output Port Memory
On: Output Port Memory is enabled. When the power station is turned off,
undergoes a firmware upgrade, or reaches the discharging level, it stores the
current output state before it powers down. Upon being turned on,
completing the firmware upgrade, or exceeding the discharging level, it
automatically restores all outputs.
※ The power station will not restore an output if that output port is
automatically turned off due to its standby time or if it is manually turned off
by pressing its corresponding control button.
9 Disable Grid Bypass
On: AC bypass output is disabled in the EcoFlow app. Now AC power will
come from the power station instead of the grid even there's still AC input
from the grid.