Manual Line Feed; Spool Cap And Nylon Line - Flymo MULTITRIM 250D Manual

5
S
1 Line
T1
T2
T3
U1

Manual Line Feed

2 Lines
Spool Cap and Nylon Line (1 Line)
T4
Spool Cap and Nylon Line (2 Lines)
1
2
To manually feed the nylon line (S)
Please note: Depending on which model you have
purchased, your trimmer may be fitted with one line
or two lines.
To remove spool cap
When refitting the spool cap
To replace nylon line.
To replace spool and line (complete)
see fig T3
smooth side uppermost
To replace nylon line on spool.
fig T4
• Ensure spool is fully located by gently rotating it
during fitment.
• Remember ! Your Flymo Multi-Trim is designed to
use only nylon line with a maximum diameter of
1.5mm. Use only genuine Flymo nylon line.
To remove spool cap
Pull
When refitting the spool cap
pressing firmly DOWN
See fig T1.
See fig T2.
see
see fig T3
smooth side uppermost
(U1).
(U1).