WARNING! Anybody using the electric hedge trimmer must be completely aware of the following safety rules and advice. Technical data 5-50 5-60 6-60 6-70 General description 1 Blade 2 Protection 3 Front switch 4 Front grip 5 Motor unit 6 Rear switch 7 Power cable 8 Pull out cable stop Safety rules...
Starting up Before switching on, it is a good idea to oil the blades. Connect the extension lead to the hedge trimmer using the pull out cable stop, only when you reach where you will be working. To start up, pull one of the trigger switches under the rear grip and the lever switch inser- ted into the front grip (Fig.
Electrical safety Voltage Make sure that your electricity supply voltage corresponds to that written on the hedge trimmer’s motor plate. Current The hedge trimmer will only work with alternating current. Plugs/extension leads We strongly advise the use of pro- tected sockets, leads and plugs in PVC or approved rubber.
Safety regulations WARNING: switch off and remove the plug from the electric socket before fixing, cleaning or disentan- gling the lead. Use a highly insulated extension lead that complies with the regula- tions in force. Make sure, before each start up, that the extension lead is out of the cutting area.
SERVICE AGENTS MAGYARORSZÁG Electrolux Lehel Kft Tel.: 00 36 1 251 41 47 NORGE Flymo/Partner, div. av. Electrolux Motor a.s. Tel.: 69 10 47 90 NEDERLAND Flymo Nederland Tel.: 0172-468322, Fax: 0172-468219 ÖSTERREICH HUSQVARNA zentralwerkstätte; Industriezeile 36, 4020 LINZ Tel.: 0732 770101-60, Fax: 0732 795922...
Page 8
Dichiarazione di conformità CE Il sottoscritto, autorizzato dalla E.C.O.P.I., dichiara che il seguente prodotto HT, costruito dalla E.C.O.P.I. 23868 Valmadrera (Lecco) Via Como, 72 Italia, è conforme alle Direttive Europee: 98/37/CEE (Direttiva Macchine), 73/23/EEC (Direttiva Bassa Tensione), 93/68/CEE (Direttiva Marcatura CEE) & 89/336/CEE (Direttiva Compatibilità Elettromagnetica), Direttiva 2000/14/ECC (Allegato V). Déclaration de conformité...
Need help?
Do you have a question about the HT 5-50 and is the answer not in the manual?
Questions and answers