Adjusting The Cutting Height; Service Recommendations - Flymo MC300 Manual

Remember
N1 - Blade bolt
N2 - Blade
N3 - Cutting height spacers (MAXIMUM 3)
N4 - Fan
• Always handle the blade with care - sharp
edges could cause injury.
• USE GLOVES.
• Never use more than 3 Cutting Height
Spacers.
• Spacers must only be fitted between the
blade and the fan and NEVER between the
blade and the bolt.
Removing the Blade and Fan.
• If the blade is cracked or damaged replace
it with a new one.
• Never use a blade bolt if the insulated
head is damaged cracked or missing.
(P)
Cleaning (Q) - USE GLOVES
IMPORTANT:
IMPORTANT:
• Your product is uniquely identified by a silver and black product rating label.
• We strongly recommend that your product is serviced at least every twelve months, more
often in a professional application.
How to Mow cont...

Adjusting the Cutting Height

Fitting the Blade and Fan
(P)
Caring for your Lawnmower
see Figure P

Service Recommendations

Note
For a Lower Cut
(N)
For a Higher Cut
Blade and Fan.
Removing the Blade and Fan
(P)
• Renew your metal blade after 50 hours
mowing or 2 years whichever is the sooner
- regardless of condition.
Figure P
(P)
At the End of the Mowing Season
Carrying your Lawnmower (R)
Storing your Lawnmower (S)
Fitting the
(P)
(P)
ENGLISH - 4