IMPORTANT ! Please check the contents of the carton are correct BEFORE assembling your new Flymo product. IF ANY PARTS ARE MISSING CONTACT:- Electrolux Outdoor Products Customer Service Department direct Telephone : 01325 300303 Fax :...
Page 3
Maintenance and storage the product rating label. Keep all nuts, bolts and screws tight to be sure 15. Flymo products are double insulated to the lawnmower is in safe working condition. EN60335. Under no circumstance should an Replace worn or damaged parts for safety.
30 metres length maximum. Maximum rating : 1.00mm size cable, 10 amps 250 volts AC. • THE MICRO LITE IS SUPPLIED WITH CABLE BROWN WIRED DIRECTLY INTO THE PRODUCT. BLACK Flymo Mains Cables and Extension Cables are BLUE available from your local Electrolux Outdoor Products Approved Service Centre.
Starting and Stopping To Start your Lawnmower Form loop in mains cable and push the loop through the slot as illustrated in picture (C) To secure, position loop over the hook and pull the cable back through the slot as illustrated in picture (D).
Page 6
Plastic cutters should be straight. Replace if bent or twisted. Replacing Plastic cutters • Use only genuine Flymo replacement plastic cut- ters specified for this product. These are avail- able from all Electrolux Outdoor Products Service Centres and major retail outlets.
Yellow Pages. professional application. To obtain service on your Flymo product simply tele- Always use genuine Flymo Spare Parts. phone or visit your local Service Centre. Prepacked spares are available from most Should you require service under the terms of our guar- Electrolux Outdoor Products stockists.
Guarantee & Guarantee Policy If any part is found to be defective due to faulty manufacture Failures not covered by guarantee within the guarantee period, Electrolux Outdoor Products, Replacing worn or damaged plastic cutters through its Authorised Service Repairers will effect the repair or Failures as a result of not reporting an initial fault.
Need help?
Do you have a question about the Micro Lite and is the answer not in the manual?
Questions and answers