Jabra Engage 75 Mono Quick Start Manual

Jabra Engage 75 Mono
How do I connect my Jabra Engage with my Siemens
OpenStage 30, 40, 60, 80 desk phone so I have remote call
control using my headset?
Prerequisites
Jabra Link 14201-10 Electronic Hook Switch (EHS) cable
One of the following Siemens OpenStage phones: 30, 40, 60, 80
Connect your headset
1. Plug the 1-sided end of the Jabra EHS cable marked blue into the
desk phone port marked with a headset icon.
2. For the 2-sided end of the cable, plug the RJ10 (small) plug of the
Jabra EHS cable into the headset base port marked with a phone icon
and the RJ45 (wide) plug into the port marked with AUX.
Configure your headset when connecting to a desk phone for the first
time
For Jabra Engage 75/75 SE, follow the onscreen setup wizard on the
base.
For Jabra Engage 45 SE/65/65 SE, the initial setup is complete after
connecting the cables.
Additional setup information for your Jabra products
EHS cable/adapter type: DHSG.
Clear dial tone switch: set to position "A".
We recommend setting the microphone volume to "6" out of 13.
https://www.jabra.com/supportpages/jabra-engage-75/9556-583-125/faq/d14ffbfa-
12de-4290-bb03-3bc4c7b0e2cb
28/10/2024 18:04
Page 1 of 2