Jabra Engage 75 Mono Quick Start Manual

Jabra Engage 75 Mono
How do I avoid the humming noise in my headset when using
an Avaya 1400/9400/9500 series desk phone?
When a Jabra wireless headset with a desk phone interface – such as the
Jabra Pro 920, Jabra Pro 9450, or Jabra Motion Office – is connected to
the headset port on an Avaya 1400/9400/9500 series desk phone, a
humming noise may occur when the headset is in use. The level of
humming noise may vary, depending on the speaker volume that is set
on the desk phone and on the Jabra wireless headset.
To avoid the humming noise, there are alternative ways to connect a
Jabra wireless headset to an Avaya 1400/9400/9500 series desk phone
by using the handset port.

Basic audio connection using the Avaya handset port

Follow these steps to connect*:
1. Remove the Avaya handset cable from the handset port on the desk
phone.
2. Connect the Avaya handset cable to the handset port on the Jabra
base.
3. Connect the supplied Jabra phone cable between the Jabra base line
port and the handset port of the Avaya desk phone.
/supportpages/jabra-engage-75/9556-583-125/faq/73b24ef0-09d8-4159-85be-
93b2bc887a1a
03/01/2024 18:28
Page 1 of 4