Jabra Engage 75 Mono How Do

Hide thumbs Also See for Engage 75 Mono:

Jabra Engage 75 Mono

How do I connect my Jabra Engage to a desk phone that has a

headset port?

This type of desk phone has a dedicated headset port. These phones

typically have a button on the front panel for switching between the desk

phone handset and the headset.

1. Plug the phone cable supplied into the

the headset port on the desk phone.

2. Plug the base into a power supply using the supplied AC adapter.

3. For Jabra Engage 65, the initial setup is complete.

For Jabra Engage 75 with touch screen, select a language on the base

and then start the setup wizard.

Jabra Engage 65

To make additional adjustments to the desk phone, see the controls

located at the bottom of the base. You can adjust the microphone

transmit level by pressing the

https://www.jabra.co.uk/supportpages/jabra-engage-75/9556-583-

117/faq/d4501288-ad95-4a30-9690-093368d3f94a

port on the base, and into

button to increase or decrease the

21/11/2023 20:16

Page 1 of 2

Table of Contents

Do you have a question about the Engage 75 Mono and is the answer not in the manual?

Page 1 21/11/2023 20:16 Jabra Engage 75 Mono How do I connect my Jabra Engage to a desk phone that has a headset port? This type of desk phone has a dedicated headset port. These phones typically have a button on the front panel for switching between the desk phone handset and the headset.
Page 2 You can enable the audio gateway to and from the desk phone by using the dial tone switch. Jabra Engage 75 with touch-screen display To make additional adjustments to the desk phone, such as adjusting the microphone transmit volume, go to the relevant section in the settings menu.