Eizo Foris FX2431 Setup Manual page 14

Prior to use
●
Connect an audio device
1. Connect the monitor to the audio device with an audio cable that matches the connectors.
Connector on the
monitor
Audio output
connector
Attention
• When using the audio device, set the volume of the monitor to "0". Adjust the volume and sound on
the audio device.
NOTE
• When using headphones, connect the
headphones to the headphone jack on
the monitor.
2
Plug the power cord of the monitor into a power outlet.
1. Plug the power cord into a power outlet and the Power connector on the monitor.
Adjusting the Screen Height and Angle
Hold left and right edge of the monitor with both hands, and adjust the screen height, tilt and swivel the screen to the
best condition for working.
1
Installation Setting/Adjustment
Audio cable *
(stereo mini jack to pin jack)
Audio cable *
(stereo mini jack to stereo mini jack)
* 1
P lease purchase the cable.
Headphone
Troubleshooting
Connectors on the
audio device
Audio input
connector
(Pin jack)
1
R
1
(Stereo mini jack)
Headphone jack
L