Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for EnerSys IMPAQ TC3 IQ
Summary of Contents for EnerSys IMPAQ TC3 IQ
- Page 1 Battery Charger OWNER’S MANUAL www.enersys.com...
-
Page 2: Table Of Contents
CONTENTS Introduction ..........3 Features ............4 Technical Information ......... 4 Safety Precautions ........7 Installation ..........8 Operating Instructions ....... 9 Fault Codes ..........13 Maintenance and Service ......15... -
Page 3: Introduction
Proper instruction and training of all users must be ensured prior to handling the battery charger system. For service, contact your sales representative or call: EnerSys EMEA EnerSys World Headquarters EH Europe GmbH 2366 Bernville Road Baarerstrasse 18... -
Page 4: Features & Information
FEATURES & INFORMATION Features • Microprocessor-controlled • Unique profile for charging Thin Plate Pure Lead (TPPL) • Able to auto-identify battery’s capacity • Unique profiles for NexSys battery charge ® • Able to adapt to State of Charge (SoC) applications: NXBLOC; NXSTND. •... - Page 5 TECHNICAL INFORMATION Technical Information (cont.) Output Power Letter Codes Output Power (kW) Number Modules Module Power (kW) 10.5 14.0 17.5 21.0 24.5 28.0 Cabinet Size (number of modules available) and DC Cable Size Standard Cable Phases Module Positions Comments Gauge Max 1 6 mm Stand-alone cabinet...
- Page 6 TECHNICAL INFORMATION Technical Information (cont.) Profile Code Charger Profile Description Pneumatic / Airmix profile. Must have Air kit fitted to use this profile. IUI AIRMIX profile Max 0.13 to 0.25 C5. Auto battery capacity with Ph1 loops. Can manually set battery capacity if required. Weekly Equalization is needed. Low rate charge profile.
-
Page 7: Safety Precautions
5. During charge, lead acid batteries produce hydrogen gas, which can explode if ignited. 16. For NexSys iON batteries, use only EnerSys ® ® Never smoke, use an open flame, or create battery packs that include the battery sparks in the vicinity of the battery. -
Page 8: Installation
INSTALLATION Installation Location AC Circuit Protection For safe operation, choose a location that is The user must provide suitable branch circuit free of excess moisture, dust, combustible protection and a disconnect method from the material, and corrosive fumes. Also, avoid high AC power supply to the charger to allow for safe temperatures (above 113ºF [45ºC]) or potential servicing. -
Page 9: Operating Instructions
INSTALLATION Installation (cont.) EU Declaration • Directive 2011/65/EU RoHS EnerSys ® hereby declares that the chargers in the NexSys + charger ranges are in conformity with • Control of Electromagnetic Fields Regulations ® the following UK and European regulations: (S.I. 2016/588) •... - Page 10 OPERATING INSTRUCTIONS Operating Instructions (cont.) Menu Access When the charger is idle, press and hold <ESC>. The Main Menu is then displayed. The main menu is automatically exited after 60 seconds of inactivity or can be exited voluntarily by pressing the <ESC>...
- Page 11 Sunday of November. The charger must be powered up at the time of the change for it to Update Software: Updates charger’s internal take effect. software. The software is provided by EnerSys ® Password This is where the password is entered to gain Parameters...
- Page 12 OPERATING INSTRUCTIONS Operating Instructions (cont.) Charging the Battery At this point, the charger should have been set up by a qualified service person. Charging can only begin with a battery of the proper type, capacity, and voltage connected to the charger. Figure 1 With the charger in wait mode (no battery connected) and without pressing the Stop/Start...
-
Page 13: Fault Codes
OPERATING INSTRUCTIONS Operating Instructions (cont.) Manual Equalization Start Automatic Equalization Start 1. At the end of the charge (GREEN charge If an equalization day has been programmed complete indicator on or flashing), press on into the charger configurations, the equalization the <EQUALIZE>... - Page 14 FAULT CODES Fault Codes (cont.) Fault Cause Solution DF5 appears when the charging profile has been achieved with a fault condition, which can be a current increase in the regulation phase, demonstrating a battery heating, or Battery or charger setting inspection a badly programmed regulation voltage, (Ah security, charge timeout, negative or a charging time that is too long and has...
-
Page 15: Maintenance And Service
MAINTENANCE AND SERVICE Maintenance and service Any data, descriptions or specifications set THERE ARE DANGEROUS WARNING forth herein are subject to change without VOLTAGES WITHIN THE BATTERY CHARGER notice. Before using the product(s), the user CABINET. ONLY A QUALIFIED PERSON SHOULD is advised and cautioned to make its own ATTEMPT TO ADJUST OR SERVICE THIS determination and assessment of the suitability... - Page 16 © 2024 EnerSys. All rights reserved. Unauthorised distribution prohibited. Trademarks and logos are the property of EnerSys and its affiliates except UL, CE, UK CA, Android, and iOS, which are not the property of EnerSys. Subject to revisions without prior notice.
Need help?
Do you have a question about the IMPAQ TC3 IQ and is the answer not in the manual?
Questions and answers