Installing the VPN Module in a Cisco 1751 Router
Step 6
Installing the VPN Module
Step 1
Step 2
Figure D-2
Cisco 1751 Standoff Location
Motherboard
standoff holes
VPN module
socket
Cisco 1751 Router Hardware Installation Guide
D-6
Place the router bottom on an antistatic mat and begin installing the VPN module.
Follow the steps in this section to install the VPN module.
The VPN module plugs into a socket, as shown in
Using two of the screws provided, attach the standoffs to the 1751 motherboard.
Locate the holes in the motherboard.
a.
Turn the motherboard over and attach the standoffs to it using two of the
b.
screws provided as shown in
Appendix D
Installing the Virtual Private Network Module
Figure
Figure
D-3.
D-2.
78-11258-04