Chapter 2 Installation; Before Installing The Router - Cisco 1751V Hardware Installation Manual

Before Installing the Router

Before Installing the Router
Note
Warning
Warning
Warning
Caution
Cisco 1751 Router Hardware Installation Guide
2-2
The router is shipped ready for desktop mounting. Before making the power and
network connections, simply set the router on a desktop, shelf, or other flat
surface.
For instructions on wall-mounting the router, refer to the
section later in this chapter.
Be sure to read the safety information in the Regulatory Compliance and Safety
Information for Cisco 1700 Routers document that came with your router.
Read the installation instructions before you connect the system to its power
source.
This equipment needs to be grounded. Use a green and yellow 14 AWG ground
wire to connect the host to earth ground during normal use.
Do not work on the system or connect or disconnect cables during periods of
lightning activity.
Do not place anything on top of the router that weighs more than 10 pounds
(4.5 kg). Excessive weight on top of the router could damage the chassis.
Chapter 2 Installation
"Wall-Mounting"
78-11258-04