Cisco 1751V Hardware Installation Manual page 19

Chapter 1 Cisco 1751 Router Overview
Table 1-1 Key Features
Feature
One FastEthernet (10/100BaseTX)
port
Cisco interface cards
Console port
Auxiliary port
Security slot
SNMP support
VoIP, VoFR, and VoATM support
AutoInstall support
78-11258-04
Description
• Operates in full- or half-duplex mode (with software
override support).
Supports autosensing for 10- or 100-Mbps operation (with
•
software override support).
Supports two slots for either WAN interface cards (WICs)
•
or voice interface cards (VICs).
Supports one VIC-only slot.
•
Supports the following WICs: ISDN BRI (U and S/T), 56-
•
or 64-kbps DSU/CSU, FT1/T1 DSU/CSU, WIC-1ADSL,
WIC-1ENET (Ethernet), highspeed serial, dual-serial, and
2Async/Sync.
Supports the following VICs: 2FXS, 2FXO, 2E&M,
•
F2XO-EU, 2FXO-M3, and 2-port ISDN Voice-BRI.
Changes in WAN interface configuration can be made as
•
your network requirements change.
Supports router configuration and management from a
connected terminal or PC. Supports up to 115.2 kbps.
Supports modem connection to the router, which can be
configured and managed from a remote location. Supports up
to 115.2 kbps.
Supports Kensington or similar lockdown equipment.
Supports Simple Network Management Protocol (SNMP) to
manage the router over a network.
Supports Voice over IP, Voice over Frame Relay, and Voice
over ATM connections.
Supports AutoInstall to download configuration files to the
router over a WAN connection.
Cisco 1751 Router Hardware Installation Guide
Key Features
1-3