Rear-Panel Ports And Leds - Cisco 1751V Hardware Installation Manual

Rear-Panel Ports and LEDs

Table 1-1 Key Features (continued)
Feature
Cisco ConfigMaker support
Cisco Voice Manager support
Compatible with Cisco Networked
Office stack
Rear-Panel Ports and LEDs
Figure 1-2 Rear-Panel Components and LEDs
Kensington-compatible WIC/VIC
locking socket
VIC
2FXS
1
SEE MANUAL BEFORE INSTALLATION
SLOT 1 OK SLOT 0 OK
Slot 1 Slot 0 WIC/VIC
OK LED OK LED
Cisco 1751 Router Hardware Installation Guide
1-4
Description
Supports Cisco ConfigMaker application, a wizard-based
software tool, to configure a network that includes the
Cisco 1751 router.
Supports Cisco Voice Manager to help you install and operate
voice and fax services over the IP network.
Stackable with other Cisco Networked Office stack products.
This section describes the router rear-panel ports and LEDs, which are shown in
Figure 1-2 and described in
slot 1
Console port
Model Cisco 1751
SLOT 1
0
SLOT 0
FDX 100 LINK
10/100 ETHERNET
10/100-Mbps
slot 0 Ethernet port
FDX/100/LINK LEDs
Auxiliary port
Table 1-2 and Table
VIC
slot 2
SLOT 2
VIC
2FXO
1
SEE MANUAL BEFORE INSTALLATION
CONSOLE
PVDM OK
AUX
PVDM
OK LED
Ground
wire OK LED
Chapter 1 Cisco 1751 Router Overview
1-3.
Power switch
THIS SLOT
ACCEPTS
ONLY VOICE
INTERFACE
CARDS
0
MOD OK SLOT 2 OK
+5, +12, -12 VDC
Slot 2
OK LED
MOD
Power
socket
78-11258-04