User Documentation; Ports And Leds; Back Panel Ports And Leds - Cisco 815 Quick Start Manual

Items Not Included with the Cisco 815 Integrated Services Router
One or more items in this list may be required for your installation:
• PC running terminal emulation software, or a modem for remote administrative access
• Cable for cable-modem interface
• Cable ties
• Number-2 Phillips screwdriver

User Documentation

For complete platform documentation, see the following URL:
http://www.cisco.com/en/US/products/hw/routers/ps380/tsd_products_support_series_home.html
All the documents referenced in this quick start guide are available on Cisco.com. For information on accessing Cisco.com, see
the "Where to Go Next" section on page
Translated Versions
http://www.cisco.com/en/US/products/hw/routers/ps380/tsd_products_support_series_home.html
http://www.cisco.com/en/US/products/hw/routers/ps380/tsd_products_support_series_home.html
4

Ports and LEDs

This section describes the ports and LEDs on the Cisco 815 integrated services router.

Back Panel Ports and LEDs

This section describes the router back panel ports and LEDs. See
Figure 3 Back Panel
1
2
WIC
4ESW
ACT 4x LNK ACT 3x LNK ACT 2x LNK
WIC 0 OK FDX
Cisco 815
12
Kensington-compatible locking socket
1
WIC 0 slot
2
Console port
3
6
23. To view or print an online document in its original page format, click the PDF icon.
3
CONSOLE
HWIC-CABLE-D-2
ACT 1x LNK
100 LINK 10/100 ETHERNET AUX
10
11
9
Figure 3, Table 1, and
5
4
DS
LINK
US
POWER
ONLINE
CABLE
MOD OK WIC 1 OK
+5, +12, -12 VDC
8
6
7
WIC 1 OK
7
MOD OK LED
8
Auxiliary port
9
Table 2.