Razor VECTOR Manual page 2

Step 3
Using long needle pliers, pinch the end cap from the
brake cable remove it and set aside.
Step 5
Using a 5 mm Allen wrench, loosen the bolts from the
collar clamp and slide the handle bar up from the fork.
Step 7
Reverse the steps.
ATTENTION: Charge battery 8 hours before using.
Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00am - 5:00pm Pacific Time.
Step 4
Using a 5 mm Allen wrench, loosen the bolt that holds
the brake cable onto the brake caliper actuator arm and
slide the cable out.
Step 6
Slide the cables out from the battery cover fairing.
2