- Time List: Display the time period that you have assigned within the
selected weekday. To assign the same time period to every weekday,
click Add this to all weekdays; click Delete this from all weekdays
to remove the selected time period from every weekday. Click
Delete to remove the selected time period.
- Start/End Time: Enter the start and end time and then click Add to
assign a time period within in the selected weekday.
Event Configuration >> Motion Detect Trigger
Select the Enable option to enable the trigger function of the camera, so
that you can send captured images within the detecting area to the FTP
server, email receiver, Network Storage server, or the connected USB
device. You have to configure corresponding settings, such as FTP server
and email server, to enable this feature.
- Schedule Profile: Select a schedule profile from the pull‐down list.
- Action: Select the destination that the captured images will be sent
to: Send Email, FTP Upload, Record to Network Storage, or Save
Image to USB.
- 44 -