Table of Contents
Advertisement
C
HAPTER
A
CCESSING THE
3.1 Using IP Setup
The camera comes with a conveniently utility, IP Setup, which is included
in the Installation CD‐ROM, allowing you to search the camera on your
network easily.
1. Insert the Installation CD‐ROM into your computer's CD‐ROM drive to
initiate the Auto‐Run program.
2. Click the IP Setup button to launch the utility. The control panel will
appear as below.
Click About to get the Version information of IPSetup.
Click Link to connect the selected camera.
Click Change IP to modify the IP address of the selected camera.
Click Search to find the IP address of the connected camera(s).
Click Exit to close the utility.
3. Once you get the IP address of the camera, launch the Web browser
or SecurView Pro to access your camera.
3
C
AMERA
- 13 -
Display the connected
camera(s).
Double click to link the
Camera.
Advertisement
Table of Contents
