Page 1
® Z-1000 OW N ER ’S MANUAL A I R PU R I FI ER, SM ALL...
Page 2
® Welcome to clean air with TruSens. Thank you for allowing us to join you on your journey towards wellness. Enjoy cleaner air in your home with PureDirect™ Technology & DuPont™ Filtration that ensure the whole room benefits from cleaner air.
SAFETY INFORMATION READ AND SAVE THESE INSTRUCTIONS/READ LABEL • Remove all packaging, including the filter bag, before use. AND OPERATING MANUAL BEFORE USING • Appliances that are obviously damaged must not be operated. PRECAUTIONS • This appliance must only be connected to a wall socket This appliance has a polarized plug (one blade is wider than outlet matching the supply plug type and rating stated on the other).
Page 5
FIRST AID INSTRUCTIONS: Seek medical attention in the However, there is no guarantee that interference will not event of an injury. occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the LAMP CONTAINS MERCURY user is encouraged to try to correct the interference by one Do not dispose of lamp.
FEATURE HIGHLIGHTS PureDirect™ Technology Independent lab testing confirms that two airflow streams are better than one, moving air effectively and more comfortably throughout the room. 360° Purification DuPont HEPA filter captures pollutants and VOC ™ gases/odors from all directions. UV-C light inactivates germs and bacteria that can get trapped in the filter.
GETTING STARTED 1 . Remove plastic bag from filter Unscrew the bottom cover and remove the plastic bag from the filter. 2 . Reattach filter Secure filter on the bottom cover and replace inside the purifier.
Page 9
3 . Set up Plug in your air purifier unit and power on. Place the purifier on a flat surface, free from obstructions: - where air can flow freely into the purifier from all sides - avoiding furnishings like bedding and curtains, as well as sources of heat or moisture 4 .
CONTROL PANEL Filter and UV Indicator Reset Power Button HEPA, Carbon and UV indicators glow red when it is time for each to be replaced. When 1 indicator is on, simply hold Reset button for 3 seconds to reset that indicator. When 2+ indicators are on, tap the Reset button to select the correct Fan Speed Settings indicator (selected indicator will blink) before holding...
CARE & MAINTENANCE WARNING: Always power off the purifier by pressing the Power Button and unplugging the power cord. To access the filter chamber, carefully remove the filter Fig. A cover so that the filter chamber is exposed (Fig. A). REPLACING HEPA DRUM FILTER The HEPA indicator will glow red when it is time to change the entire HEPA drum filter.
REPLACING THE STANDARD CARBON FILTER The Carbon indicator will glow red when it is time to replace the Carbon layer. 1. Gently peel away the used Carbon layer from the fastener strips (Fig. E). 2. Wrap a new Carbon layer around the filter drum and attach Fig.
REPLACING UV BULB 1. The indicator will glow red when it is time to 4. Release carriage from the UV bulb (Fig. J). replace the UV bulb. 5. Secure carriage to new UV bulb (page 11) 2. Remove HEPA filter drum (Fig. A) and use a (Fig.
FAQ & TROUBLESHOOTING How often do I need to change the That’s easy. The purifier’s replacement indicators will notify you when it is time filters? to replace the Carbon or HEPA filters, or the UV bulb. Plan on replacing the Carbon every 3-4 months, HEPA every 12-15 months, and UV bulb every 1-3 years.
TruSens machine. Any damage to or malfunction of your air purifier resulting from the use of unauthorized TruSens filters or UV bulbs may not be covered by this warranty or may result in a service fee if the damage or malfunction is determined to be caused by such use.
SUPPORT We value your feedback. Please contact us to share your experience. Visit our website at www .trusens .com Email us at support@trusens .com Call us at 1-833-TRUSENS (1-833-878-7367) Subscribe to our YouTube channel TruSens & Follow us @TruSensWellness...
Need help?
Do you have a question about the Z-1000 and is the answer not in the manual?
Questions and answers