Table of Contents
Advertisement
2.2 Connecting the Camera to LAN
Use the provided Ethernet cable to
connect the camera to your local area
network (LAN).
When you connect the power
adapter, the camera is powered on
automatically. You can verify the
power status from the Power LED
(amber) on the front panel of the
camera.
Once connected, the Link LED starts
flashing green light and the camera is
on standby and ready for use now.
If you use a wireless network in your
application environment, you need to
attach the included detachable
antenna to the camera.
If your wireless network has set
encryption, you can use WPS button
or configure the wireless connection
via a LAN connection.
NOTE:
Please configure the wireless setting via the wire connection.
- 10 -
Advertisement
Table of Contents
