Camera Display Area: It shows the connected camera(s) within the
-
same network. By default, the IP setting on the Camera is set up DHCP.
If you have DHCP server, the camera will automatic get the IP address
from DHCP server. If you do not have DHCP server on your network, it
will show the default IP as 192.168.10.30.
Double click the IP address; it will link to Camera's Web Configuration
page.
Change IP: Click this button to bring up the following window. It
-
allows you to change the IP Address. You can select either Static IP or
click DHCP. Then, enter the Administrator ID & password. By default
ID/password is: admin. When complete, click "Change".
: Click this button to search the connected camera in the
-
Search
same network."
: Click this button to exit the program.
-
Exit
- 16 -