Page 1
Installation Guide Models Covered: Pop-Up Bath Waste THA14 THBB14 THBL14 THBN14 THC14 Please keep this booklet for future reference. Installer: When you have read these instructions, please ensure you leave them with the user.
I N S TA L L AT I O N Identify all components are present prior to installation. Components 1. Overflow Body 2. A - Grey Overflow Washer for 5-15mm thick baths B - Black Overflow Washer for <5mm thick baths 3.
I N S TA L L AT I O N 1. Fit the overflow pipe (10) onto the connections on the waste body (14) and overflow body (1). Use a WRAS approved silicon sealant where necessary. 2. Push the waste seal (13) through the bath hole, ensuring all edges are flat to the surface of the bath.
G U A R A N T E E The confidence we have in the quality of our products and services enables us to offer a free peace- of-mind product guarantee from 2 years up to a lifetime guarantee against any manufacturing faults, with proof of purchase.
Page 8
If you have any queries, our dedicated customer service teams and products experts are available to help. www.heritagebathrooms.com enquire@heritagebathrooms.com 0330 026 8503 Website Email us Call us UK: Heritage Bathrooms, Pooley Hall Drive, Birch Coppice Business Park, Dordon, Tamworth B78 1SG EU: Masco Europe S.à.r.l., 14 Rue Strachen, 6933 Mensdorf, Luxembourg.
Need help?
Do you have a question about the THA14 and is the answer not in the manual?
Questions and answers