Selecting Cooktop Settings; How To Synchronize Left Elements; To Turn Off - GE Profile PHP7030 Owner's Manual

Selecting Cooktop Settings

cooktop has its own power levels ranging from low to
high. Power level settings necessary for cooking will vary
depending on the cookware being used, the type and
lower settings for melting, holding and simmering and
use higher settings for heating quickly, searing and frying.
When keeping foods warm confirm selected setting is
Larger elements and elements marked "Keep Warm" are
not recommended for melting.
Hi is the highest power level, designed for large quantity
rapid cooking and boiling. Hi will operate for a maximum
minute cycle by either pressing the - pad followed by the
+ pad OR swiping the power level arc to a lower level
and then followed by swiping the power level arc to the
highest level.

How To Synchronize Left Elements

NOTE:
large oval pots.
To Turn On
Hold the Sync Burners pad for about half a second
to connect the two burners. Operate either element as
described on page 9 to adjust power level.
CAUTION
Do not place any
cookware, utensils or leave excess
water spills on control key pads. This
may result in unresponsive touch
pads and turning off the cooktop if
present for several seconds.
NOTE: The warm setting may not
glow bright red like the other heating
operations.

To Turn Off

On/Off pad on either burner to turn off the
or
2. Touch the Sync Burners to turn both burners off.
Hi
boiling quickly
frying
searing
reducing
simmering
holding
Low
melting
49-2001135 Rev. 4