Advertisement
Quick Links
Advertisement
Related Manuals for Bluetti EP800
Summary of Contents for Bluetti EP800
- Page 1 BLUETTIEP800 Quick Guide V2.1...
- Page 3 BLU ETTI Recommend to connect the cable s from sub panel to Junction box, EP800 backup terminal . It is and junctions not provided by BLU ETTI White, black, red ,green , 6 AWG electric cables . It is...
-
Page 5: Installation
• The installation must be performed by a licensed electrician. Improper installation may result in death or serious injury and property damage. • Prepare necessary tools and accessories. • Read the EP800 User Manual and Quick Start Guide. • Recommended the open circuit voltage of solar system is between 240V and 500V. - Page 11 4.6 Connect PV cables PVl +: To solar panel positive ．｀髻 PVl-：丁o solar panel negative PVl PE: PVl to solar panel Conductor ground cross-sectiona I area: PV2+: To solar panel positive 春 ．＠ PVl 72AWG PV2-: To solar panel negative PV2 lOAWG PV2 PE: PV2 to solar panel ground...
- Page 13 Switch 4. There is an automatic transfer switch inside 2.Normally, turn the transfer switch to the EP800 , it will switch over to the Batteries the BACKUP side of EP800 to backup side within 20ms, when the grid goes down.
- Page 16 6001-7000W at least 4*8500; Only compatible with ENPHASE IQ7 and IQ6 Note: Not all solar PV inverters are compatible with EP800, please contact BLUETTI before installation. If you want to use existing solar panels, please purchase CT and Meter from the official website.
- Page 18 3 seconds, and the green indicator on the button will light Step 3 About 40 seconds later, the indicator on EP800 will stay green. Step 4 Switch on the AC circuit breakers connected to the EP800 GRID terminal. Step 5 Power on the system via BLUETTI ap p Step 6 Check the voltage of BACKUP terminal and turn on the breakers of generator supply.
Need help?
Do you have a question about the EP800 and is the answer not in the manual?
Questions and answers