Telephone Operations; To Answer A Call; Making A Call; To End A Cal - Maxcom KXT480 User Manual

Select option number 1 with the UP / DOWN keys or press the
number 1 directly.
The display shows " FLASH 300"
3
Press UP or DOWN button to select 90/95/100/120/180/300/600 or
1000 ms.
Press the SET / R key to save the selected option.
4
Press the DEL key three times to exit the menu.
5
6

TELEPHONE OPERATIONS

6.1

To answer a call

When the phone rings;
Lift the handset or press the SPEAKERPHONE button on the Base unit.
The Call timer starts after going on line.
6.2

Making a call

1 Lift the Handset, listen for a dial tone
Dial the telephone number you wish to call.
2
6.3

To end a cal

Replace the Handset on the Base unit cradle or press the
SPEAKERPHONE button on the Base unit.
The SPEAKERPHONE light indicator will turn OFF.
6.4

During a call

To adjust the
handset
volume
To switch
between the
Handset and
the
Speakerphone
To adjust the
speakerphone
volume
The display shows ' 00-00 '.
The display shows the number as you 14 digits dial(maximum of
will be shown).
To end the call, return the Handset to the Base unit.
Adjust the volume of the handset to your
comfortable
volume level using the Handset volume switch
located on
the top cover of the Base unit
During a phone conversation through the Handset,
press the SPEAKERPHONE button to speak hands-
free.
The conversation remains through the Handset
until the Handset is replaced on the Base unit
cradle Then the Speakerphone light will turn on .
While in speakerphone mode, lift the Handset to
switch off the Speakerphone and talk through the
Handset.
Adjust the volume of the speakerphone to your
comfortable volume level using the
SPEAKERPHONE volume switch located at the
right side of the Base unit.
19
ENGLISH