Senal CXBS-1 Quick Start Manual

Thank you for choosing Senal.
The CXBS-1 microphone base sits independently on a tabletop, desktop, or podium. It can be used with
a video conferencing system or connected to a mixing board for sound reinforcement applications.
Precautions
• Keep this product away from water and any flammable gases or liquids.
• Do not attempt to disassemble or repair this product.
• Use only parts provided by the manufacturer.
• Clean this product with only a soft, dry cloth.
• Make sure that this product is intact and that there are no missing parts.
Setting Up the CXGN Gooseneck Microphone
1.
Plug the gooseneck into the XLR input of the base.
2. Connect the XLR cable to the input of a video conferencing system or a mixing board.
Important! When integrating the CXGN microphone into a video or audio conferencing system, or using
it with a mixing board, make sure that phantom power is enabled.
Specifications
Construction
Connector
Dimensions (W × H × D)
Cable Length
Weight
Metal
Input: 3-pin XLR female
Output: 3-pin XLR male
3.9 × 3.5 × 5.6 in. (9.9 × 8.9 × 14.2 cm)
12 ft. (3.6 m)
1.65 lb. (750 g)