Replacing the Battery in the Power Supply The.Senal.PS-48B.Power.Supply.runs.on.an.LR44.battery..To.replace.the.battery,. follow.these.instructions: OPEN 1. Open.the.battery.compartment.cover.from.the.notch.at.the.base.of.the. microphone. 1. Rotate.and.open.the.battery.compartment.as.shown.by.the.arrow.on.the.power. supply. 2. Remove.the.old.battery.if.necessary.and.insert.a.fresh.battery.in.the.orientation. indicated.on.the.battery.compartment. 3. Close.the.battery.compartment.and.lock.it.by.rotating.it.in.the.opposite.direction. of.the.arrow.on.the.power.supply. Replacing the Battery in the Power Supply ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪...
Need help?
Do you have a question about the OLM-2 and is the answer not in the manual?
Questions and answers