Swiss Madison SM-STS41 Installation Instructions

Lumière Toilet Seat with Night Light
INSTALLATION INSTRUCTIONS
Prior to Installation:
· Inspect product to ensure no damages have
occurred while in shipping.
· The step-by-step guidelines in the installation instructions
are a general reference. Should there be any
discrepancies, Swiss Madison cannot be held liable. It is
recommended to install all Swiss Madison products by hiring
a licensed professional.
· Read installation and maintenance instructions thoroughly
before installing. Be sure to use proper tools and always wear
proper personal safety accessories for your protection.
Recommended Tools:
· Screwdriver
· AAA Battery (not included)
1. Install Mounting Hardware
· Install expansion nut, rubber washer, hinge and screw into
the hole, then tighten with screwdriver.
3. Adjust Fit
· Adjust seat on the bowl for perfect fit.
5. Tighten Screws
· Tighten the screws on both hinges.
swissmadison.com | 1-434-MADISON | info@swissmadison.com
2. Align Seat
· Align toilet seat with hinge pin and install onto toilet.
4. Remove Seat
· Open seat 90°, then press the button to remove from toilet.
5. Install Seat
· Install hinge covers, then align toilet seat with hinge pin
and install onto toilet.
®
w e l l m a d e f o r e v e r